This wall light as been designed to complement both the GCG003 and the GCG005 bollard. An elegant wall light manufactured from laminated glass with a choice of either oil treated light or dark Iroko timber. The fitting is supplied with a stainless mounting plate and equipped with a number of high powered Luxeon LEDs complete with individual driver to provide secondary low voltage supply to the LEDs. Once lit the enclosed ultra bright LEDs will enhance the natural colours of the laminated glass panels to create exciting energy efficient mood lighting.
Please note that the fitting can also be manufactured using Oak or Walnut timber at extra cost.
Application
Walls, Pillars, Facades
Technical Information
* Total height of wall light: 295mm
* Glass height: 135mm
* Timber height: 160mm
* Width: 132mm
* Projection: 165mm
* Light source: White high powered Luxeon LEDs (Other colours available to special order)
* Driver: Constant current LED driver
Installation
All GC products are supplied with individual installation information detail which should be followed accordingly. We recommend that installation should be carried out by a qualified electrician.
General Care and Maintenance of your GC Exterior Light Fitting
The glass block should be wiped over with a damp cloth periodically. If in a hard water area, it is recommended that the glass block be covered with a polyethylene bag when spraying the garden. Any wooden parts to the light fittings should be treated annually with a proprietary natural oil product as this will keep the wood in pristine condition and maintain its attractive natural appearance. To keep its appearance and condition the stainless steel components should be periodically wiped over with fine machine oil.
Please Note: If the light fittings have been purchased without the LED driver, please note that the High Powered LED fitted into the fitting should be wired in SERIES and not parallel. If you are unsure about this please consult a local electrician. The LED should be used in conjunction with a constant voltage LED driver. Do not install an off/on switch on the low voltage side of the power supply.
Delivery
These fittings are made to order only and delivery is normally up to 28 days from receipt of order. A 50% deposit is required at point of ordering, the remaining balance on despatch. No charge is made for delivery within the UK Mainland only. For a firm delivery date please telephone our sales office.
