A long elegant wall light constructed with laminated glass secured to a brushed stainless steel plate in a choice of oiled Light or Dark Iroko timer mounting frame. The light fitting is equipped with 8x high performance 1w LEDs and individual driver to provide secondary low voltage supply to the LEDs. Once lit the enclosed ultra bright LEDs will enhance the natural colours of the laminated glass panels to create exciting energy efficient mood lighting. Any combination of white, blue, green and red LEDs can be used. The fittings can be mounted horizontally of vertically.
Oak and Walnut timber is also available to special order and extra cost
Wall’s, Pillar’s, Façade’s, Patio’s
* Total height of wall light: 845mm
* Width: 130mm
* Projection: 130mm
* Light Source: 8x White High Powered Luxeon LEDs (other colours available to special order)
* Driver: Constant current LED driver
All GC products are supplied with individual installation information detail which should be followed accordingly. We recommend that installation should be carried out by a qualified electrician.
General Care and Maintenance of your GC Exterior Light Fitting
The glass block should be wiped over with a damp cloth periodically. If in a hard water area, it is recommended that the glass block be covered with a polyethylene bag when spraying the garden. Any wooden parts to the light fittings should be treated annually with a proprietary natural oil product as this will keep the wood in pristine condition and maintain its attractive natural appearance. To keep its appearance and condition the stainless steel components should be periodically wiped over with fine machine oil.
If the light fittings have been purchased without the LED driver, please note that the High Powered LED fitted into the fitting should be wired in SERIES and not parallel. If you are unsure about this please consult a local electrician. The LED should be used in conjunction with a constant voltage LED driver. Do not install an off/on switch on the low voltage side of the power supply.
These fittings are made to order only and delivery is normally up to 28 days from receipt of order. A 50% deposit is required at point of ordering, the remaining balance on despatch. No charge is made for delivery within the UK Mainland only. For a firm delivery date please telephone our sales office.