UK & Worldwide Delivery Available
This 800mm high solar path light is equipped with a PIR and remote control, it is a superb solution for offering security around your home and at the same time giving excellent illuminated pedestrian access during the hours of darkness on pathways and driveways when standard mains lighting is not available. The PIR motion sensor has a superb detection range with a wide 120-degree beam angle. The incorporated flood light creates a downward and forward spread of light which offers a offers a warm white wash of light in offering a further level of security lasting for hours in the hours of darkness. The fixture is supplied prefixed to a root mounted radiata pine, bollard which is fully sand to give a smooth, quality finish. It is also pressure treated with Tanalith E preservative. Many choices of operations are available, see table below.
Securbol Solar Security Pedestal Light Specifications
LEDs: SMD2835-40pcs(Main Light) 10pcs (wall wash)
Colour Temperature: Daylight 6000K, Warm White 3000K
Lumen Output: 700 lm
Beam Angle: 100 Degrees
LED Expected Life: Up to 35,000 Hours
Sensors: Photocell (Dusk to Dawn) PIR (Motion Sensor)
PIR Sensor Distance: Approx 2m 120 degree
Lighting Modes: (1)Constant Light PIR Mode- 50% constant light from dusk for 5 hours/ 30% battery, then switches to standard PIR mode.
(2) Downwards Wash PIR Mode- Wall wash from dusk, main light illuminates at full brightness when PIR is triggered for approx., 20 seconds .
(3) Standard PIR Mode- Light remains off until PIR is triggered by movement, then full brightness of main light for approx. 20 seconds
(4) ON/OFF (previous memory)
IP Rating: IP65
Battery Type: 7w Lithium Ion (18650/3.7V/5400mAh) (Replaceable)
Solar Panel: 7w – 3.7Wp Poly-cystalline Solar Panel
Remote Control: Infrared (Range Up to 7m)
Wood Type: Radiata Pine_ Pressure Treated with Tanalith E Preservative
Install Height: 800mm above ground/400mm below ground (1200mm overall)
Plank Dimensions: 1200 x 220- x 44mm
Guarantee: 3 Years